We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Dry Bag for Diving: How to Choose and Use One Safely

Learn how to choose a dry bag for diving, what size and closure to look for, and how to pack and protect gear on the water. Practical tips for sailors.

Updated November 2026

A dry bag for diving keeps your phone, keys, spare mask strap and dry clothes out of the water, whether you are surface-supporting a dive or ferrying gear from a dinghy to a mooring. Choosing the right size, closure and material takes only a few minutes, and packing it correctly keeps the seal reliable. This guide walks through the decisions that matter on the water.

Choose the Right Size for Your Dive Gear

Dry bags are sized by capacity in liters. For most recreational divers, a 10 to 20 liter bag holds a towel, a change of clothes, a phone in a case and small accessories. A 30 to 40 liter bag suits bulkier items such as a wetsuit top, a dive computer case and a spare fin strap kit. Before buying, lay out what you actually carry and check that everything fits with room to roll the top closed. Overpacking strains the seams and makes it harder to get a tight seal. For more on how capacity translates to real packing space, see How Big Is a 10L Dry Bag? Sizing Guide for Dinghy and Cruising Sailors.

Shopping for one? See our guide: 4 Best Dry Bags for Backpacks for Kayaking and Travel (2026).

Pick a Material and Closure That Seal Reliably

Most dry bags use coated nylon or PVC-laminated fabric, and both shed water well when the closure is done correctly. Roll-top closures are the standard choice: the top is folded down at least three times, then clipped or buckled. A roll-top closure needs no special tools and holds up well to repeated opening. Zipper-seal bags are convenient for quick access, but the zipper is only as watertight as its maintenance, so keep it clean and free of grit. Check that the bag has a rigid or semi-rigid base if you plan to set it on a wet deck or in a dive boat.

Pack and Seal the Bag Step by Step

  1. Dry your gear as much as possible before packing. Trapped water is the most common cause of fogged electronics.
  2. Place a small absorbent cloth or silica packet in the bag if the contents are sensitive.
  3. Pack the heaviest items low and the items you need first near the top.
  4. Press out excess air gently, keeping the bag upright so the air rises to the open top.
  5. Roll the top down at least three times, flatten the roll, and clip or buckle it tight.
  6. Squeeze the bag before you leave the dock. If you see air escaping or the seam flexes, reseal it.

Use and Maintain the Bag Between Trips

Rinse the outside of the bag in fresh water after saltwater use, then leave it open to dry fully before storing. Store it loosely rolled rather than tightly folded to reduce stress on the seams. Inspect the welds, seams and buckles before each trip. A small pinhole or a worn closure edge can be patched or replaced, but a bag with a failed seam should be retired from wet use.

Dive-Specific Considerations

Dive gear adds weight and sharp edges that can puncture thin fabric. Keep regulators, fins and knives in a separate bag or wrapped in a towel, and do not toss the bag onto a rough deck. If you are supporting a dive from a boat, keep the bag clipped to a secure point so it cannot drift away if the boat moves.

Common Mistakes to Avoid

  • Rolling the top only once or twice, which allows water to wick in.
  • Overfilling the bag so the closure cannot be sealed properly.
  • Packing wet gear and then closing the bag, trapping moisture inside.
  • Storing the bag damp, which leads to mildew and odor.
  • Assuming a dry bag is waterproof when submerged. Most are designed to resist splashes and brief immersion, not long periods underwater.
  • Roll-top dry bag with a clear window: Lets you find small items without opening the seal repeatedly. View on Amazon
  • Dry bag with a shoulder strap: Keeps your hands free when you move between the dock and the boat. View on Amazon
  • Dry bag with a clip-on tether: Attaches to the boat or your gear so it stays secure in choppy water. View on Amazon

FAQ

Can I use a dry bag for diving underwater?

Most dry bags resist splashes and brief immersion, but they are not designed for depth. Use a dive-rated waterproof case for electronics you need underwater.

How do I know if the seal is working?

Roll the bag tight and squeeze it gently. If air escapes or the fabric flexes around the closure, reseal it and try again.

How often should I replace a dry bag?

Replace a bag when seams separate, closures stop sealing or the fabric is punctured. Check your bag before each trip for wear.

Conclusion

A well-chosen dry bag for diving protects your gear when it matters most. Match the size to your kit, pick a reliable roll-top or seal closure, and seal it carefully before every trip. Consult a qualified dive professional for guidance on any equipment you rely on underwater.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our sailing gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Sailing The Web.