We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Rigging a Laser Sailboat: 3 Best Blocks and Parts Compared

Rigging a laser sailboat takes the right blocks and hardware. Compare three sailboat blocks with ball-bearing sheaves and see which fits your rig and budget.

Rigging a Laser Sailboat: 3 Best Blocks and Parts Compared

Updated November 2026

Rigging a laser sailboat comes down to a handful of small, well-chosen parts, and the blocks you pick do more work than most sailors expect. This list focuses on single blocks with ball-bearing sheaves that suit small sailboat sheeting and control lines. Selection criteria were sheave size, bearing type, becket availability, and how well each block matches the loads a Laser-class rig puts on its lines, based on manufacturer specifications and owner feedback patterns.

Our top picks at a glance

  1. 1Nautos 91110R-SINGLE Block with Becket 40 MM SHEAVE with Ball Bearings- Sailboat HardwareTOP CHOICEBest overallNautos 91110R-SINGLE Block with Becket 40 MM SHEAVE with Ball Bearings- Sailboat HardwareView on Amazon
  2. 2Rigging small sailboatsBest for a simple single-line leadRigging small sailboatsView on Amazon
  3. 3Nautos 91109R Single Block 40 MM SHEAVE with Ball Bearings- Sailboat HardwareBest for a compact, becket-free blockNautos 91109R Single Block 40 MM SHEAVE with Ball Bearings- Sailboat HardwareView on Amazon

Our Top Picks

Product Best for Key feature
Nautos 91110R-SINGLE Block with Becket Overall rigging with an attachment point Becket plus ball-bearing sheave
Rigging small sailboats Simple single-line leads Single sheave, small-boat sizing
Nautos 91109R Single Block Compact, becket-free runs 40 mm sheave, ball bearings

Nautos 91110R-SINGLE Block with Becket 40 MM SHEAVE with Ball Bearings- Sailboat Hardware

Nautos - 91110R-SINGLE Block with Becket 40 MM SHEAVE with Ball Bearings- Sailboat Hardware

Nautos – 91110R-SINGLE Block with Becket 40 MM SHEAVE with Ball Bearings- Sailboat Hardware

View on Amazon

Best for: Overall rigging with an attachment point

This block suits sailors who want to fasten a line directly to a fixed point while still running a ball-bearing sheave for smooth travel.

Pros

  • The becket gives a secure attachment point.
  • Ball bearings reduce friction under load.

Cons

  • The becket adds bulk where space is tight.
View on Amazon

Rigging small sailboats

Rigging small sailboats

Rigging small sailboats

View on Amazon

Best for: Simple single-line leads

This option fits sailors who need a straightforward block for a single control line and prefer a minimal hardware setup.

Pros

  • Simple single-sheave design is easy to rig.
  • Sized for small-boat use.

Cons

  • Fewer mounting options than a becket block.
View on Amazon

Nautos 91109R Single Block 40 MM SHEAVE with Ball Bearings- Sailboat Hardware

Nautos - 91109R- Single Block 40 MM SHEAVE with Ball Bearings- Sailboat Hardware

Nautos – 91109R- Single Block 40 MM SHEAVE with Ball Bearings- Sailboat Hardware

View on Amazon

Best for: Compact, becket-free runs

This block is for sailors who want a low-profile ball-bearing sheave without the added becket, typically for line runs where space is limited.

Pros

  • Compact profile suits tight spaces.
  • Ball bearings keep line travel smooth.

Cons

  • No becket, so you will need a separate attachment method.
View on Amazon

Buying Guide

Sheave size and bearing type

Manufacturers commonly specify sheave diameter alongside the line size the block accepts. Ball-bearing sheaves generally run more freely than plain bushings, which matters when you are sheeting under load.

Good picks for this: Nautos 91110R-SINGLE Block with Becket, Nautos 91109R Single Block

Becket or no becket

A becket gives you a fixed attachment point, which simplifies rigging. If you can already secure the block another way, a becket-free design keeps the hardware lower profile.

Good picks for this: Nautos 91110R-SINGLE Block with Becket, Nautos 91109R Single Block

Line compatibility

Check that the sheave groove matches your control line diameter. A mismatch causes line wear and slipping, so confirm the listed line size before you buy.

Good picks for this: Rigging small sailboats

Load and mounting

Match the block to the loads in your rig and confirm the mounting method fits your boat’s deck or hull layout. Consult a qualified rigger for anything involving structural loads.

Good picks for this: Rigging small sailboats, Nautos 91109R Single Block

FAQ

Do I need a becket on every block?

No. A becket is useful when a line needs a fixed attachment point, but many runs work fine with a becket-free block secured by another method.

What does a ball-bearing sheave do?

It reduces friction as the line runs over the sheave, which makes sheeting and adjustment easier under load.

How do I know if a block fits my line?

Check the listed sheave size and line diameter against your control line before buying, since a mismatched groove causes wear and slippage.

Conclusion

For a versatile block with an attachment point, the Nautos 91110R-SINGLE Block with Becket is the broadest choice. If you need a simple single-line lead, the Rigging small sailboats block fits well, and the Nautos 91109R suits tight, becket-free runs. Confirm sizing against your own rig before ordering.

Sources

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our sailing gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Sailing The Web.