We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Eyson Inflatable Life Jacket: Sizing, Fit, and Care Guide

Learn how to size, fit, inspect, and maintain an Eyson inflatable life jacket so it inflates reliably when you need it on the water.

Updated November 2026

An Eyson inflatable life jacket is a lightweight, low-profile way to stay afloat on the water, but only if it is sized correctly, worn properly, and kept in working order. This guide walks you through checking fit, understanding the inflation system, running a routine inspection, and avoiding the mistakes that cause inflatables to fail when it matters most.

Step 1: Check the Sizing and Weight Rating

Start with the manufacturer’s chart. Inflatable life jackets are usually sold by chest measurement and body weight, and the two should agree. If your chest size falls between sizes or your weight sits near the top of the range, go with the larger option so the vest has room to fill and seal around you.

Shopping for one? See our guide: 3 Best Inflatable Life Jacket Vests for Sailing and Boating (2026).

Measure around the fullest part of your chest, under your arms, with the tape level. Compare that number to the chart rather than relying on your usual clothing size, since inflatables cut differently from foam vests.

Step 2: Understand the Inflation Mechanism

Most inflatable vests use a manual pull cord that fires a CO2 cartridge, with an oral tube for backup inflation. Some models also include an automatic version that inflates when the vest contacts water, usually through a dissolving tablet. Know which type you own, and read the instructions to confirm what the auto function requires.

  • Locate the pull cord and the oral tube before you go on the water.
  • Confirm the CO2 cartridge is screwed in fully and the cartridge is not already punctured.
  • If the vest has an automatic activation tablet, check that it is present and not expired.

Step 3: Fit and Wear It Correctly

An inflatable that is loose or sitting high can ride up and fail to keep your head out of the water. Fasten every buckle and strap, then tighten the crotch strap so the vest cannot slide upward when you are in the water. Test by lifting the shoulders gently; if the vest moves more than a few inches, tighten it further.

Wear it over your clothing, not under a jacket, and make sure the front closes fully. Deflated, the vest should feel snug, not restrictive.

Step 4: Inspect and Maintain It on a Schedule

Inspect the vest before each trip and do a full check at least once a season. Look for abrasion, cracks, or soft spots in the bladder, check that the zippers and buckles operate freely, and make sure the CO2 cartridge and inflation tube show no damage. Replace the cartridge and any activation tablet on the intervals the manufacturer specifies, and do a test inflation only if the manual allows it, since firing a cartridge uses it up.

Check How often What to look for
Visual inspection Before each outing Tears, abrasion, loose stitching
Cartridge and tablet Per manufacturer date Expiration, corrosion, proper seating
Full service check Once per season Bladder integrity, buckles, zippers

Common Mistakes to Avoid

  • Choosing size by habit rather than by the chest and weight chart.
  • Leaving the vest loose so it rides up in the water.
  • Forgetting to replace an expired cartridge or activation tablet.
  • Storing the vest in a hot car or hanging it near a heat source, which degrades materials.
  • Packing a vest that is still wet, which invites mildew and corrosion.

Keep a spare CO2 cartridge on hand if your vest uses a replaceable one, so a single cartridge doesn’t leave you without backup on a longer trip. View on Amazon

A small dry bag keeps the vest, spare parts, and your phone protected during transport and storage. View on Amazon

FAQ

How do I know if my Eyson inflatable life jacket is the right size?

Compare your chest measurement and body weight to the manufacturer’s sizing chart. If you fall between sizes, choose the larger one so the vest can fill and fit snugly.

Can I test-inflate my inflatable vest?

Only if the manual allows it. Firing the CO2 cartridge uses it up, so most owners test the mechanism by inspecting the parts and the cord instead.

How often should I replace the cartridge?

Follow the expiration date printed on the cartridge and the service interval in the manual. Replace it promptly after any inflation, even a partial one.

Conclusion

Correct sizing, a snug fit, and regular inspection are what make an inflatable vest work when you need it. Build those habits into every outing and check the manufacturer’s guidance for your specific model. For questions about your safety equipment, consult a qualified marine safety professional or your local boating authority.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our sailing gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Sailing The Web.