We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Gill Foul Weather Gear: How to Choose the Right Set for Sailing

Learn how to choose gill foul weather gear for dinghy and cruising sailing, covering fit, layering, waterproof ratings, and what to look for before you buy.

Updated November 2026

Gill foul weather gear is a practical choice for sailors who spend time on the water in wind, spray and cold rain. This guide walks you through the factors that matter most, so you can match a jacket and bib set to your sailing style and avoid the common fit and layering mistakes.

Start With Your Sailing Conditions

Before comparing models, decide where and how you sail. A dinghy sailor on a sheltered lake in spring needs something different from a cruiser on an offshore passage in October. Think about water temperature, air temperature, how wet you expect to get, and how much you will be moving around the boat.

Cold water matters more than air temperature for many sailors, because immersion in water below about 60°F (15°C) drains body heat quickly. If you sail in cool water, prioritize a fully sealed, insulated system over a lightweight shell.

Choose the Right Jacket and Bib Combination

Most foul weather gear is sold as a jacket and bib trouser. The jacket should be long enough to cover your lower back when you sit on the rail, and the bib should come high enough to keep spray out of your torso. Check that the bib straps adjust easily while wearing a PFD, since a bulky life jacket changes the fit.

Look at the cuffs, hood and collar closures. Adjustable cuffs and a hood that fits over a sailing cap reduce the amount of water that gets in during hard tacks and when you are working the sheets.

Check Fit and Layering

Foul weather gear should fit over a midlayer without restricting your arms or hips. Try the full setup on with the layers you plan to wear, then reach overhead, crouch and sit on a low surface. Gear that pulls across the shoulders or bunches at the knees will leak and wear out faster.

  1. Wear your usual base layer and a fleece or thin insulating midlayer.
  2. Put on the bib first, then the jacket, and zip everything fully.
  3. Raise both arms, twist at the waist, and squat to check for pulling.
  4. Confirm the jacket still covers your lower back when bending forward.
  5. Check that you can get in and out of the bib without help.

Evaluate Waterproofing, Breathability and Seams

Manufacturers usually describe waterproofing with a hydrostatic head rating, measured in millimeters, along with a breathability figure. Higher numbers indicate better resistance, but real-world performance also depends on taped seams and well-placed zippers. Look for fully taped seams and storm flaps over zippers, since these are the most common leak points.

Breathability matters during active sailing. If you overheat, you will sweat under the shell and feel wet even when the outer fabric is keeping water out. Vents at the underarms or back can help when you are working hard.

Common Mistakes

  • Buying a size that fits only over a T-shirt, then finding it too tight with a fleece.
  • Ignoring the life jacket. Wear the PFD over the jacket or under it, and check that you can still move freely.
  • Choosing a lightweight shell for cold-water sailing without adding insulation underneath.
  • Storing wet gear in a closed bag, which encourages odor and degrades coatings over time.
  • Skipping a trial fit in the same layers you sail in.
  • Gill OS2 Offshore Jacket: a common choice for cruisers who want a fully sealed, durable shell with good hood coverage. View on Amazon
  • Gill OS2 Offshore Trousers: bib-style trousers designed to pair with the OS2 jacket for complete coverage. View on Amazon
  • Gill Waterproof Sailing Gloves: useful for keeping hands warm and grippy when handling wet lines. View on Amazon

For footwear that pairs well with wet-weather kit, see our guide to Gill Baltimore Deck Shoes: Fit, Grip and Sailing Use Guide, and if you are planning a warm-weather season as well, compare options in 7 Best Mens Summer Deck Shoes for Boating and Warm Weather (2026).

FAQ

Do I need a bib or can I use a jacket alone?

A bib keeps spray and rain off your legs and lower torso, which matters most when sitting on a wet deck or hiking out. Many dinghy sailors choose a full set for that reason, while some coastal sailors are comfortable with a jacket alone in mild conditions.

How do I know what size to order?

Check the manufacturer’s size chart against your chest, waist and inseam measurements. Remember to account for the layers you plan to wear underneath, since a fleece or insulating midlayer can change the fit noticeably.

How should I care for foul weather gear?

Rinse it with fresh water after salt exposure and let it air dry away from direct heat. Follow the care label, and consult the manufacturer’s instructions before using any cleaning product or re-waterproofing treatment.

Conclusion

The right gill foul weather gear depends on your water temperature, sailing style and how much movement you need. Focus on fit with your layers, sealed seams and sensible closures, and test the full setup before committing. A well-matched set will keep you comfortable and working on the boat for longer.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our sailing gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Sailing The Web.